FOR SERVICE SEND TO: AUTO METER PRODUCTS, INC. 413 W. Elm St., Sycamore, IL 60178 USA (815) 899-0801
INSTALLATION INSTRUCTIONS
1½" PRESSURE GAUGES
1. Read instructions thoroughly. Please consult a qualified mechanic if you
have not had training in the proper installation of instruments.
2. Determine ideal mounting location. Consult your vehicle’s repair manual
to locate: A) Fuel Pressure Port
B) Oil Pressure Port
C) Any other Pressure port
Preliminary Steps
CAUTION: Some late model vehicles use electronic sensors in their
pressure and temperature senders for engine control functions. Before
removing the original senders, we recommend that you contact your Auto
Dealer to be sure no critical functions will be disrupted.
With pressure gauges, it is beneficial to add a T-fitting to install your new
gauge and to keep the warning light operational. This allows you to
monitor the pressure and still have a warning light to indicate emergency
conditions.
1. Locate pressure port.
2. Install T-fitting if needed.
3. Apply teflon sealing tape or compound to insure a leak-free connection.
4. Install gauge into pressure port, being careful not to over tighten.
5. After installation, start engine and check all connections for leaks.
INSTALLATION
Use Teflon Sealing Tape Or Sealing
Compound On Pipe Threads.
12 MONTH LIMITED WARRANTY
Auto Meter Products, Inc. warrants to the consumer that all Auto Meter High Performance products will be free from defects in material and workmanship for a period of twelve (12) months from date of the
original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at Auto Meter’s option to the consumer, when it is determined by Auto Meter Products, Inc. that the product
failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of parts in the Auto Meter instruments. In no event shall this warranty exceed the original purchase price of
the Auto Meter instruments nor shall Auto Meter Products, Inc. be responsible for special, incidental or consequential damages or costs incurred due to the failure of this product. Warranty claims to Auto Meter
must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in
duration to the said 12 month warranty period. Breaking the instrument seal, improper use or installation, accident, water damage, abuse, unauthorized repairs or alterations voids this warranty. Auto Meter
Products, Inc. disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by Auto Meter.
SERVICE
For service send your product to Auto Meter in a well packed shipping carton. Please include a note explaining what the problem is along with your phone number. Please specify when you
need the product back. If you need it back immediately mark the outside of the box “RUSH REPAIR,” and Auto Meter will service product within two days after receiving it. ($10.00 charge will be
added to the cost of “RUSH REPAIR.”) If you are sending product back for Warranty adjustment, you must include a copy (or original) of your sales receipt from the place of purchase.
© 2001 Auto Meter Products, Inc. 2650-509 3/28/01
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern