Auto-meter 6345 Bedienungsanleitung PDF herunterladen

12V

TTER

INSTALLATION INSTRUCTIONS

DIGITAL PYROMETER GAUGES

2650-1240-00

GOOD ENGINE

GROUND

GROMMET

+ 12v CONNECTION

RED

BLACKWHITE

CAUTION:

As a safety precaution, the +12V terminal of this product

should be fused before connecting to the 12V ignition switch.

We recommend using a 1 Amp, 3AG fast-acting type cartridge

fuse (Littlefuse

# 312 001 or an equivalent).

INSTALLATION

1. Check that you have all parts required for installation, and the engine is cool.

2. Disconnect the negative (-) battery cable.

3. Gauge mounts in a 2

/16" hole. Use supplied brackets and nuts to secure gauge to dash.

4. Drill 1" diameter hole where wires pass through sheet metal (such as firewall) and install rubber grommet provided.

(Grommet will require slit.)

5. Connect the white wire to dash lighting or switchable 12v light source, the red wire to switched +12V source and

the black wire to ground. (see diagram for details) Digital diaplay will dim when power is applied to the white wire.

FUSE

(SEE CAUTION

BELOW)

FIREWALL

+12v

DASH

Important

Pyrometers are sensitive, high accuracy instruments. They must be handled and installed with care to insure

proper performance. Carefully read and follow these instructions, and your pyrometer will provide you with a

long and accurate life.

CAUTION:

Wear Safty glasses and disconnect the battery

before making any electrical connections.

OPTIONAL

SLIT TUBING

RECOMMENDED

(AVAILABLE AT MOST

HARDWARE STORES)

QUESTIONS ?

If after completely reading these instructions you have questions regarding the operation or installation of your instrument(s),

please contact Auto Meter Technical Service at 815-899-0801.

You may also email us at [email protected].

Additional information can also be found at http://www.autometer.com

1 2

Inhaltsverzeichnis

Seite 1 - Important

12V BATTERYINSTALLATION INSTRUCTIONSDIGITAL PYROMETER GAUGES 2650-1240-00GOOD ENGINE GROUNDGROMMET+ 12v CONNECTION REDBLACKWHITECAUTION:As a safety pr

Seite 2 - PROBE INSTALLATION

Power-UpWhen power is applied to the gauge, the display will light up with all eights immediately followed by the gauge firmware version. After the f

Verwandte Modelle: 6545 | 6945 |

Kommentare zu diesen Handbüchern

Keine Kommentare

Auto-meter 6345 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Auto-meter 6345 herunter. Auto Meter 6345 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 6545 | 6945 |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Auto-meter 6345